Oarlocks

Concept2 oarlocks are shaped for easy oar handling with positive stable positioning on both drive and recovery. Oarlocks are sold with replaceable bushings for pitch adjustment and pin fit. Made of unbreakable "Supertough" nylon with stainless steel gates, they meet FISA standards for oarlock turning diameter.

Pin diameter must be specified at the time of order. Different colored bushings fit different pin diameters as shown in the table below.

Bushing Color	Sweep	Scull
Black	9/16"	1/2" (w/adapter*)
Blue	13mm	13mm
White	1/2"	7/16"
*Adapter for "crescent" type scull backstand fits into black 1/2" scull bushing.

Pitch Bushings for Oarlocks

5°-3° Bushings Qty 4	6°-2° Bushings Qty 4	7°-1° Bushings Qty 4	4°-4° Bushings Qty 4
Each wire "rake" holds a complete set of 16 bushings. There are 4 of each pitch, enough for 2 oarlocks.

Shop Online at concept2.com

Oarlock and C.L.A.M. Order Form
(US and Canada)

Using Bushings to Adjust Pitch

Instructions for Using the Bushings to Adjust Pitch

Adjust oarlock pitch from 1 to 7 degrees by selecting two bushings with the desired pitch imprinted and inserting them in opposite directions as shown in the drawing. (If replacing existing oarlocks, keep in mind that most non-adjustable oarlocks have a built-in pitch of 4 degrees.)